ViciBox 11.0.0 AGI Module Bug

This bug affects ViciBox v.11.0.0 installations where the res_agi.so module fails to load due to an outdated modules.conf file. The res_speech.so module is required for res_agi.so to load, but the packaged configuration prevents this, causing ViciDial to malfunction. Removing the noload => res_speech.so line from /etc/asterisk/modules.conf and rebooting resolves the issue.

Note

This fix is only needed for servers already installed with ViciBox v.11.0.0. If you ran zypper up before vicibox-install, you do not need to apply this fix.

Symptoms

Telephony servers with this issue will show log output stating that no application can be found for the AGI extension.

Example Log Output

[Jun 28 12:47:30] == Using SIP RTP CoS mark 5
[Jun 28 12:47:30] > 0x7fd550024340 -- Strict RTP learning after remote address set to: 192.168.1.106:12722
[Jun 28 12:47:30] WARNING[25228][C-00000006]: pbx.c:2928 pbx_extension_helper: No application 'AGI' for extension (defaultlog, 9684, 1)
[Jun 28 12:47:30] == Spawn extension (defaultlog, 9684, 1) exited non-zero on 'SIP/145-00000008'
[Jun 28 12:47:30] WARNING[25228][C-00000006]: pbx.c:2928 pbx_extension_helper: No application 'AGI' for extension (defaultlog, h, 1)
[Jun 28 12:47:30] == Spawn extension (defaultlog, h, 1) exited non-zero on 'SIP/145-00000008'

The Fix

To resolve this issue, follow these steps:

Log in as the root user to access the # command prompt.
Run the following command to comment out the problematic line:
sed -i 's/^noload => res_speech.so/;noload => res_speech.so/' /etc/asterisk/modules.conf
Reboot the server:
reboot
Alternatively, you can restart Asterisk without rebooting:
asterisk -rx "core restart now"